Full Roll Cage

Regular price $1,250.00

Please contact us if you are interested in this product.

Full cages are built to the customer's choice of sanctioning body rulebook - Formula Drift, NASA, SCCA, NHRA or anything else that you may need. Materials used are based off the rules and what bending dies I have. Currently I am able to work with 1.75" DOM steel tubing which meets the needs of majority of rulebooks.  My cages are mig welded, so I am unable to work with chromoly at this time.

It is the customer's responsibility to determine which rulebook specs are needed in order for the cage to be built to proper specs.  If you need help determining this, I can assist you with your decision. Ultimately the decision is yours as to what you want and need. 

 

The price listed is for a minimum spec 6 point cage (8 point for NHRA). 

NHRA approved swing out door bar - $175 for the driver side door bar only.  $350 for both driver and passenger door bars.

Anti-intrusion bars (required for FD) - $150 total

Gussets - $50 per gusset. *If you want A pillar gussets going down the windshield on each side, the total additional cost would be $100*

Any other addition - $50 per tube. *If you're adding an X, there will be a diagonal tube that is 1 piece. The other diagonal which intersects this tube will be 2 pieces. Making for a total of 3 tubes. The total additional cost would be $150*

Dash Trimming - $200 to cut the dash for fitment.  Not all factory mounting points can be used with some cars do it cage fitment and some may need removed.  Some plastic tabs can be brittle when old, I will not be liable for them if they break as it may be unavoidable.

Interior charge - $300 if you're wanting to keep full interior (or at least as much as possible).  I will need the interior in the car for taking measurements and testing fitment.  I will not reinstall it, this charge is for removal and the extra work for proper fitment.  Please note there are situations where some pieces simply cannot be retained due to proper cage design for safety.  I will also not be liable for any broken clips as some may become very brittle with age and breaking them may be unavoidable.

Once an appointment is scheduled, please have the following prepared prior to drop off:

  • Drivers seat set in your driving position
  • Front windshield removed
  • Carpet removed
  • Car must be clean inside and out

If you are unable to trailer your car and need to drive it to me, please inform me so we can discuss and plan accordingly.

A $500 non refundable deposit is required at the time of vehicle drop off.

All cages are designed using the latest CAD software.  Before any construction begins, a generic design will be shared with you for your review and approval.  The design is tweaked throughout the build process and updates will be shared with you.

Please contact me at TechnickSlide@gmail.com for an accurate quote and for scheduling. If you have any questions please let me know.